Cold-rolled Steel Drawer Slides
Heavy Duty Soft Close Drawer Slides K2053
- Width: 53mm
- Size Range: 12″ to 24″
- Material: Q235 Cold-rolled Steel
- Installation Gap: 19.2±0.3mm
- Loading Capacity: 80KG/18″ (450mm)
- Material Thickness: 2.0*2.0*2.0mm
- Level of Travel: Full Extension
If you need customization, please contact us (+86)18126638650 or email info@censohardware.com
Tech Specs
—— Click on the custom options for the heavy duty locking drawer slides you need and contact us! ——
Size Chart
| Model | L | T | A | B | C | D | E | F | G |
|---|---|---|---|---|---|---|---|---|---|
| 14" | 350 | 350 | 245 | / | / | 160 | / | / | / |
| 16" | 400 | 400 | 128 | 288 | / | 224 | / | / | / |
| 18" | 450 | 450 | 128 | 320 | / | 256 | / | / | / |
| 20" | 500 | 500 | 160 | 384 | / | 192 | 320 | / | / |
| 22" | 550 | 550 | 160 | 416 | / | 192 | 352 | / | / |
| 24" | 600 | 600 | 192 | 480 | / | 256 | 416 | / | / |
Benefits of Partnering With CenSo for Drawer Slides
- Excellent Technology: Our 20+ R&D engineers use 15+ years of design and development experience to develop solutions for your project.
- Flexible Design: Besides providing a wide range of off-the-shelf products, we can customize various slide contents to adapt them to your project plan.
- Continuous Service: The entire CenSo team is committed to being your best partner. We will provide follow-up technical support on slides to ensure that your project is worry-free.
- Quality Assurance: Our drawer slides will be tested for 50,000 pulls and pulls at full load and 48 hours of salt spray test. We will also add corresponding tests according to the slides of different applications
faq
How do you replace old drawer slides with soft close?
To replace old drawer slides with soft close drawer slides, follow these steps:
1. Remove the old slides: Take out the drawer and use a screwdriver to remove the old slides. Slides are usually screwed to the drawer and cabinet.
2. Measure and select new slides: Measure the length and width of the existing slides and select the appropriate soft close drawer slides. Make sure the new slides match the dimensions of the drawer and cabinet.
3. Install the soft-close slides: Install the soft-close slides to the drawer and cabinet. Follow the instructions on the instructions to fix the slides to the sides of the drawer and the inside of the cabinet. It is usually necessary to adjust the position and angle of the slides to ensure alignment.
4. Adjust and test: After installing the slides, put the drawer back in and test its operation. Check that the drawer slides smoothly and closes smoothly. If the closing is not ideal, adjust the slide’s fastening screws or adjustment screws as needed.
5. Make fine adjustments: Soft close drawer slides usually come with adjustment features to fine-tune the closing speed and alignment. Make adjustments as needed to ensure the best soft-close effect.
Should drawer slides be longer or shorter than the drawer?
The length of the drawer slide should match the depth of the drawer. Specifically, the length of the slide should be selected based on the actual size of the drawer to ensure that it can open and close smoothly and support the weight of the drawer. Here are some basic principles:
1. Full extension slides: If you are using full extension slides, the length of the slide should usually be the same as or slightly longer than the depth of the drawer so that the drawer can be fully extended and provide full access.
2. Partial extension slides: The slide length should be selected for partial extension slides based on the drawer’s design and needs. The slide length is usually shorter to ensure that the drawer can open and close smoothly.
3. Actual selection:
Measure accurately: Make sure to measure the actual depth of the drawer and select a slide of the corresponding length.
Manufacturer recommendations: Refer to the slide manufacturer’s recommended length to ensure compatibility and optimal performance.
In short, the length of the drawer slide should be selected based on the depth of the drawer and the usage requirements. Usually, the slide length matches the depth of the drawer to ensure normal use and stability.
Why choose heavy duty soft close drawer slides instead of ordinary drawer slides?
Compared with ordinary slides, heavy duty soft close drawer slides have the following significant advantages:
High load-bearing capacity: Suitable for drawers with heavier items, ensuring longer use.
Soft-closing function: closes slowly and smoothly, reducing noise and wear, extending the service life of drawers and heavy duty soft close drawer slides.
Safety: Greater stability and durability, avoiding the risk of the heavy duty soft close drawer slides being damaged or falling off during use.
Therefore, heavy duty soft close drawer slides are particularly suitable for applications that require high load-bearing capacity and frequent opening and closing.
Contact Us
